1978-1979 Ford Bronco Godzilla Swap Kit
Designed for the 1978-1979 Ford Bronco and 1973-1979 F150 pickup truck. This kit is manufactured to place a 7.3L Godzilla engine in a stock 4x4 1978-1979 Ford Bronco and 1973-1979 1/2 ton truck. The kit is designed for use with a 6R80 or 10R80 transmission and a NP205/Atlas transfer case. It consists of engine mounts, engine towers, a crossmember, a transfer case adapter mount, and all the hardware necessary to mount the powertrain in your truck. The engine towers will come unfinished, but the rip edges can be welded for an additional cost. All components will come in raw steel. No modification is necessary to install this kit, it retains all factory mounting locations. Instructions are included.
An oil cooler relocation or delete may be needed depending on the suspension application.
Photos depict the kit powder-coated black with the rip edges fully welded.
Please contact us directly for shipping outside the U.S. lower 48.
Currently operating on a 1 week lead time.
Note: If you choose to have your kit welded, there will be a 1-3 business day delay in your order.
Instructions can be found here: Godzilla Swap Install Guide
Designed for the 1978-1979 Ford Bronco and 1973-1979 F150 pickup truck. This kit is manufactured to place a 7.3L Godzilla engine in a stock 4x4 1978-1979 Ford Bronco and 1973-1979 1/2 ton truck. The kit is designed for use with a 6R80 or 10R80 transmission and a NP205/Atlas transfer case. It consists of engine mounts, engine towers, a crossmember, a transfer case adapter mount, and all the hardware necessary to mount the powertrain in your truck. The engine towers will come unfinished, but the rip edges can be welded for an additional cost. All components will come in raw steel. No modification is necessary to install this kit, it retains all factory mounting locations. Instructions are included.
An oil cooler relocation or delete may be needed depending on the suspension application.
Photos depict the kit powder-coated black with the rip edges fully welded.
Please contact us directly for shipping outside the U.S. lower 48.
Currently operating on a 1 week lead time.
Note: If you choose to have your kit welded, there will be a 1-3 business day delay in your order.
Instructions can be found here: Godzilla Swap Install Guide
Designed for the 1978-1979 Ford Bronco and 1973-1979 F150 pickup truck. This kit is manufactured to place a 7.3L Godzilla engine in a stock 4x4 1978-1979 Ford Bronco and 1973-1979 1/2 ton truck. The kit is designed for use with a 6R80 or 10R80 transmission and a NP205/Atlas transfer case. It consists of engine mounts, engine towers, a crossmember, a transfer case adapter mount, and all the hardware necessary to mount the powertrain in your truck. The engine towers will come unfinished, but the rip edges can be welded for an additional cost. All components will come in raw steel. No modification is necessary to install this kit, it retains all factory mounting locations. Instructions are included.
An oil cooler relocation or delete may be needed depending on the suspension application.
Photos depict the kit powder-coated black with the rip edges fully welded.
Please contact us directly for shipping outside the U.S. lower 48.
Currently operating on a 1 week lead time.
Note: If you choose to have your kit welded, there will be a 1-3 business day delay in your order.
Instructions can be found here: Godzilla Swap Install Guide
