1978-1979 Ford Bronco Coyote Swap Kit
Designed for the 1978-1979 Ford Bronco and 1973-1979 F150 pickup truck. This kit is manufactured to place a 5.0L Coyote engine in a stock 4x4 1978-1979 Ford Bronco and 1973-1979 1/2 ton truck. The kit is designed for use with a 6R80 or 10R80 transmission and a NP205/Atlas transfer case. It consists of engine mounts, a crossmember, a transfer case adapter mount, and all the hardware necessary to mount the powertrain in your truck. The engine towers will come fully welded in raw steel. No modification is necessary to install this kit, it retains all factory mounting locations. Instructions are included.
Note: Requires the use of the F150 Oil Filter housing from 2011-2020. If alternator stays in factory location then it is required to use the F150 Timing Cover and Alternator. Kit shown with KRC power steering system installed and Sanden SD7 AC Compressor and Bracket with F150 Timing Cover.
Please contact us directly for shipping outside the U.S. lower 48.
There is a 3-4 week lead time on this product. Please inquire for an accurate time line.
Instructions can be found here: Coyote Swap Install Guide
Designed for the 1978-1979 Ford Bronco and 1973-1979 F150 pickup truck. This kit is manufactured to place a 5.0L Coyote engine in a stock 4x4 1978-1979 Ford Bronco and 1973-1979 1/2 ton truck. The kit is designed for use with a 6R80 or 10R80 transmission and a NP205/Atlas transfer case. It consists of engine mounts, a crossmember, a transfer case adapter mount, and all the hardware necessary to mount the powertrain in your truck. The engine towers will come fully welded in raw steel. No modification is necessary to install this kit, it retains all factory mounting locations. Instructions are included.
Note: Requires the use of the F150 Oil Filter housing from 2011-2020. If alternator stays in factory location then it is required to use the F150 Timing Cover and Alternator. Kit shown with KRC power steering system installed and Sanden SD7 AC Compressor and Bracket with F150 Timing Cover.
Please contact us directly for shipping outside the U.S. lower 48.
There is a 3-4 week lead time on this product. Please inquire for an accurate time line.
Instructions can be found here: Coyote Swap Install Guide
Designed for the 1978-1979 Ford Bronco and 1973-1979 F150 pickup truck. This kit is manufactured to place a 5.0L Coyote engine in a stock 4x4 1978-1979 Ford Bronco and 1973-1979 1/2 ton truck. The kit is designed for use with a 6R80 or 10R80 transmission and a NP205/Atlas transfer case. It consists of engine mounts, a crossmember, a transfer case adapter mount, and all the hardware necessary to mount the powertrain in your truck. The engine towers will come fully welded in raw steel. No modification is necessary to install this kit, it retains all factory mounting locations. Instructions are included.
Note: Requires the use of the F150 Oil Filter housing from 2011-2020. If alternator stays in factory location then it is required to use the F150 Timing Cover and Alternator. Kit shown with KRC power steering system installed and Sanden SD7 AC Compressor and Bracket with F150 Timing Cover.
Please contact us directly for shipping outside the U.S. lower 48.
There is a 3-4 week lead time on this product. Please inquire for an accurate time line.
Instructions can be found here: Coyote Swap Install Guide
